Although the current version of Syslinux (any version 3.00 or greater) should work with FAT32, that was not always the case. Either method should work, but some users have found FAT16 works more reliably than FAT32.
#HOW TO INSTALL LINUX ON USB WINDOWS#
Why does the from-within-Linux method require FAT16, but the Windows method works with FAT32?Ĭould I just leave and reuse an existing FAT32 USB partition using the Linux syslinux version? It appears that the KNOPPIX file is hard-wired to seek for CD-ROM and not USB drive.Why is it that DSL installed to USB won't finish booting after conversion from. You'll probably find a way to make it work. If your system auto-mounts the USB stick, try it with the stick both mounted and unmounted. Try going without it, try going with it, try using sudo, try unplugging and replacing your USB stick. Some users have mentioned that grub-install whines about the -no-floppy argument. I just about finished installing, but then GRUB wouldn't install. Also, check that your bootloader ( GRUB or Syslinux) config files are set up right. Read the section on USB Booting, and read about Your BIOS and You. Really old computer BIOSes may or may not support boot-from-USB (pre-2000 or so).I installed everything, but my computer keeps booting from my hard drive! If you have figured out another way of installing DSL to a stick, add your knowledge where you see fit.
#HOW TO INSTALL LINUX ON USB INSTALL#
There are actually lots of how-tos/walkthroughs for installing DSL to a USB Flash Drive.
Check your BIOS setup screen, and pop in a USB stick at the next boot to try it out.įinally, you're probably going to wipe your USB Drive, so BACK UP YOUR DATA. If you're going to boot the USB drive (not just run it from within another OS), then you need to make sure your BIOS can boot from USB.A working operating system and an internet connection.512 MB is preferable, 64 MB will work in a pinch. If you're going to install to a USB drive, you'll need: Installing to an external USB Hard Drive does work, but some external enclosure hardware won't like being used as a boot source. It's cool to carry your whole OS in your pocket, so the kids install DSL to a USB Flash Drive for booting from a USB port.Ī USB Flash Drive is not the same as a USB Hard Drive.
0 kommentar(er)
